How to Perform a Commercial Roof Inspection for Leaks and Damage

If you’re the owner of a commercial property, it’s important to know how to properly inspect your roof for damage and leaks. A small leak can turn into a big problem if not addressed quickly, so it’s crucial to be on top of any potential issues. In this article, we’ll walk you through the steps of performing a commercial roof inspection. We’ll also discuss some common causes of roof damage and leaks.

The first step in inspecting your commercial roof is to assess its condition. Take a look at the roof surface and check for any signs of damage, such as cracked or missing tiles, warping, and holes. You should also look for water stains on the ceilings and walls inside your building. If you see any evidence of a leak, it’s important to address it right away.

Next, take a look at the roof structure to make sure there are no visible signs of wear or damage. Inspect the rafters, trusses, and girders for cracks, splits, or other damage. Make sure all of the fasteners are tight and secure.

Finally, check the eaves, soffits, and flashing to make sure they are in good condition. Inspect the seals around the roof penetrations, such as vents and chimneys. Make sure all of the screws and nails are still in place, and that there is no corrosion or rust.

If you’re not comfortable inspecting your commercial roof yourself, be sure to contact a professional roofing contractor in Sherman Oaks CA for assistance. They will be able to identify any potential problems and recommend solutions.

Matrix Roofing + Waterproofing, Inc

5160 Van Nuys Blvd #486, Sherman Oaks, CA 91403

(877) 344-1044

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *